Ram Heavy Duty Adjustable Front Track Bar for 14+ 2500 and 13+ 3500 4x4 trucks. Adjustable track bars are used to help center your axles when leveling the truck or running a suspension lift. This track bar significantly improves lateral stiffness over stock and is considerably stronger than stock to hold up to the abuse of large tires and aggressive off road driving. Length is adjustable on the vehicle to make adjustments a breeze. Uses maintenance free Synergy Dual Durometer Bushings on both ends. Bent to clear most aftermarket differential covers. Pair with Synergy's Drag Link and Tie Rod to bullet-proof your steering and guarantee product compatibility from stock height to 4 plus inches of lift.
Fits:
2014+ Ram 2500 4x4
2013+ Ram 3500 4x4
2014+ Ram Power Wagon
Benefits:
Allows centering of front axle when running a suspension lift
Adjustable without removing from vehicle
Maintenance Free, no greasing required
No jam nuts that are impossible to keep tight
No modifications required to install
Isolates Noise, Vibration, and Harshness (NVH) increasing ride quality
Compatible with Synergy HD Steering
Bent to clear most aftermarket differential covers
Limited Lifetime Warranty
Features:
Made from high quality 1.50 inch x .250 wall DOM
Retains factory track bar mounting bolts & hardware
Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
100 percent bolt on components assures an easy, trouble free installation with the use of basic hand tools
Notes:
Compatible from 0-4 inches of lift in the stock mounting locations with no bump stop spacing required. Drop pitman arm and front track bar relocation bracket recommended for lifts over 4 inches and requires 2 inches of bump stop spacing
Can be used with lowered trucks (competition sled pulling) to re-center the axle
The replacement adjustable joint is 4810-01 and the replacement bushings are 4328-01
Min/max lengths: 37.75 inches / 39.25 inches
OEM Track Bar is 38.63 inches or 38.75 inches For Power Wagons
