Synergy Jeep 2007-2018 Jeep Wrangler JK Complete Upper Control Arm - Lower Control Arm - Track Bar Hardware Kit
Details:
- Fits 2007-2018 Jeep Wrangler 2007-2018 Jeep Wrangler JK and Jeep Wrangler Unlimited JK
- High strength G9 hardware
- Replaces the Lower Control Arm (LCA) Upper Control Arm (UCA) hardware and specialized nut tabs that get destroyed from wheeling abuse
- Replaces the Rear Track Bar (TB) bolts which often get worn out from service
- Replaces the Front Track Bar Frame Side (TB) bolt on 2012+ 2007-2018 Jeep Wrangler JK with a 14mm Grade 10.9 bolt
- Includes hardened extra thick washers that will not deform or contort like Standard washers
Complete Kit Includes Lower Control Arm Track Bar Hardware Kit 8050
- 8 Each 9/16-18 UNFX4.0 inch long G9 bolts (LCAs)
- 4 Each 9/16-18 UNFX3.0 inch long G9 bolts (TBs)
- 12 Each 9/16-18 UNF G9 Stover top lock nuts
- 24 Each 9/16 inch Extra Thick G9 hardened flat washers
- 1 Each M14-2.0X80mm Grade 10.9 bolt (2012+ Front Frame Side Track Bar Bracket)
- 1 Each M14-2.0 GG9 Stover top lock nut
and Upper Control Arm Hardware Kit 8050-01
- 4 Each 9/16-18 UNFX3.50 inch long G9 bolts (RUCAs)
- 4 Each M12X1.50 85MM (3.50 inch) long GR10.9 bolts (FUCAs)
- 4 Each M12X1.50 G9 Stover top lock nuts
- 4 Each 9/16 inch Extra Thick G9 hardened flat washers
- 8 Each 1/2 inch Extra Thick G9 hardened flat washers
- 2 Each Rear Upper Control Arm Nut Tab, Frame Side
- 2 Each Rear Upper Control Arm Nut Tab, Axle Side
