PROMO
The Flashpaq for the 2020 Jeep Gladiator JT 3.6L is here and demand has been off the charts. Enjoy an extensive set of custom features accompanied with power gains of up to 29 HP & 37 lb-ft TQ. Superchips will continue to offer a best-in-class PCM swap process for the 202 Jeep Gladiator. Please review all product details and features below. It is important that you follow the important steps required to tune this exciting vehicle.
***This product requires a PCM swap in order to tune your Jeep***
FEATURES
Color Screen
Speedometer Correction
Tire Size - 25'' - 41''
Axle Gear Ratio - 2.73 - 5.38
T-Case Gear Ratio - 2.72 - 5.00
Speed Limiter - Stock/Raised
Rev Limiter - Stock/Superchips Value/+256/+258
TPMS Threshold Adjust - 22-56 PSI
Idle UP - 700-2000 RPM
Sway Bar Disable - Unlock/Exit
Daytime Running Lights Adjust - None/High/Low/Turn/Fog/Fender
Data Acquisition
DTC Read & Clear
Internet Updateable
Performance Tune(s)
Tow Tune
Crawl Tune
Economy Tune
TPMS On/Off Available (Download Required) Adjust feature only available on TrailDash/TD2
Performance 93 29HP 37TQ
Performance 91 25HP 29TQ
Performance 87 17HP 18TQ
Engage Sway Bar - Sway bar unlock
Disable Auto Start/Stop
PCM Swap Options
Option 1: Cross-ship PCM swap (subject to availability of PCMs)
After you receive your 3876-JL Flashpaq be sure to follow the bypass module instructions included with your device. You must connect to your vehicle and follow the instructions prior to proceeding with the PCM swap., Upon confirming the first steps, take your VIN and your product and head to towww.superchips.com/PCM-SHIP. Once you proceed, you will need to set up a PCM shipment and the included pre-authorization to secure that shipment. This process is all online and very simple.
Option 2: Send in your factory PCM to be unlocked
This free service will be available to you anytime. Please contact technical support to begin. Once we receive your stock PCM, we will quickly unlock it and get it back to you so you can tune with your Flashpaq. Please note you will still need to install your bypass module and connect to your vehicle prior to swapping PCM.
** This product has not been tested or validated on right-hand drive Jeep applications or imported (non-American VIN based) Jeep applications. They are not supported by this product.
