FLOWMASTER FORCE II CAT-BACK EXHAUST SYSTEM
2017-2022 Ford F-250/F-350 Super Duty with 6.2L and 7.3L engines.
Our Force II® line of exhaust systems are engineered as our quietest offerings, but will wake up your vehicles sound and power over the factory O.E. exhaust. You can generally expect a noticeable sound increase with a deep performance tone outside the vehicle, yet minimal interior drone in the cab area while cruising down the road enjoying all the performance benefits you've come to expect from Flowmaster®. This bolt-on emissions-legal cat-back system features full stainless steel construction, uses the factory hanger locations, 50 Series HD™ performance muffler with large 4.00-inch internals and dual 3.00-inch mandrel bent tailpipes offering two tailpipe exits in one kit. Choose your tailpipe exit either located under the rear bumper for an aggressive dual exhaust look, or exiting out the sides behind the rear tires to prevent blowing exhaust on your boat or trailer when towing. The system is finished off with a pair of large 4.00-inch polished logo embossed stainless steel tips for a modern look and includes instructions and all necessary hardware for an easy at home installation. Note: Fits 2/4 wheel drive and all wheelbases.
Features:
- Moderate Exterior Sound with Mild Interior Sound
- Large 4.00-inch Polished 304 Stainless Steel Tips
- Dyno-Tuned for Maximum Performance
- Mandrel-bent Stainless Steel Tubing
- Uses the Factory Hanger Locations
- 409S Stainless Steel Construction
- 50 Series HD Performance Muffler
- Retains Factory Resonators
- Lifetime Limited Warranty
- Flowmaster Quality
- Easy Installation
Specs
Brand | Flowmaster |
Catalytic Converter Included | No |
Emission Code | 5 |
Exhaust Series | Force II |
Exit Position | Dual Out Rear / Dual Out Side |
Heat Shield | No |
Material | 409 Stainless Steel |
Mount Type | Uses Factory Hangers |
Muffler Body Length (in) | 18 |
Muffler Color | Black |
Muffler Finish | Painted |
Muffler Inlet Diameter (in) | 3 |
Muffler Inlet Location | Centered |
Muffler Material | 409S Stainless Steel |
Muffler Outlet Diameter (in) | 3 |
Muffler Outlet Location | Dual Outlet |
Muffler Overall Length (in) | 24 |
Muffler Part Number | Kit Only |
Muffler Quantity | 1 |
Muffler Series | 50 Series HD |
Muffler Shape | Oval |
Muffler Type | Reflection |
Product Type | Exhaust System |
Single Dual | Dual |
Sound Level | Moderate |
System Type | Cat-back |
Tip Cut | Angle |
Tip Diameter (in) | 4 |
Tip Edge Style | Cut |
Tip Finish | Polished |
Tip Length (in) | 13 |
Tip Logo | Embossed |
Tip Material | 304 Stainless |
Tip Quantity | 2 |
Tip Shape | Round |
Tubing Diameter (in) | 3 |
Tubing Material | 409S Stainless Steel |
California Proposition 65 Chemical Name | Chromium (hexavalent compounds) |
| Lead |
California Proposition 65 Required | Yes |
Part Number | 817757 |