Banks Power Boost Tube Kit 2013-18 Ram 6.7L Red Finish (Both Sides)

Banks 25992 boost tubes for the 2013-18 Ram Cummins are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5 inch or 4 inch) which will improve airflow, and allow the turbocharger to spool up faster.

Banks hot and cold side tubes have up to 103 percent percent greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool.

Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions.

Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots.

Huge increase in size and flow over stock (3.5 inch vs 2 1/4 inch)

Greater cooling capacity

Lower EGTs

Mandrel-bent aluminized steel construction

Constant diameter tubing for the best flow

Perfect fit and finish

4- and 5-ply heavy-duty silicone couplers

Spring-loaded constant tension clamps

Combine with Banks 3.5 inch or 4 inch Monster Ram for maximum power

Works with stock intercooler or aftermarket intercooler with stock inlet and outlet size and location

Emissions Compliant: D-161-122

Larger Diameter (Hot Side):  

 Banks: 3.5 inch (103 percent greater flow area)

 Stock: 2.75 inch with dent

Larger Diameter (Cold Side):  

 Banks: 3.5 inch (67 percent greater flow area)

 Stock: 2.75 inch

Banks hot side has  103% greater  flow area than OEM hot side.
Banks cold side has  67% greater  flow area than OEM cold side.

Better flowing intercooler tubes results in less boost pressure loss allowing for more air and fuel to be delivered to your engine resulting in maximum horsepower. Replace your stock 2-3/4" boost tubes with Banks' huge 3-1/2" OEM left and right side boost tubes.

This kit is designed to work with the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).