South Bend Clutch Single Disc 88-00.5 Dodge Cummins 350HP & 650TQ

$412.25 $371.03
Southbend Clutch

Single Disc Kit

0090 RALLY 350 Clutch Assembly Replacement - No Flywheel

This quality South Bend Dyna Max Clutch MU 0090 RALLY is an excellent choice when replacing the stock clutch on a stock truck without performance modifications.

This Dyna Max kit features an organic friction material comprised of 808 composite, resulting in a significantly reduced operating temperature which gives this kit ultra-smooth engagement & extended life. This kit will hold up to 350 horsepower & 700 ft. lbs. of torque.

Complete Clutch Replacement Kit, comes with everything you need to do the job, including Throw Out Bearing, and Stock Needle Pilot Bearing, and alignment tool. *88-93 Getrag trans must re-use stock crank bolts*

Flywheel Not Included  - Your stock 12 1/4" flywheel must be resurfaced.

When choosing a clutch it is very important to match the appropriate horse power and work load.   For example: The 0090 RALLY is capable of handling the horse power and torque ratings provided in our listings, but if the truck is used for heavy hauling when coupled with torque ratings exceeding 600 ft. lbs. damage to the clutch disc WILL occur. The cause and effect is the 12 1/4" disk does not provide enough dampened area to absorb the added torque of the Cummins along with heavy hauling. The 0090 is great for light towing and performance. If you are going to be towing in excess of 8,000 lbs. while exceeding 600 ft. lbs. of torque you must go with one of the 13 inch clutches: 13125 OFEK, 13125 FEK. This will offer a clutch that will handle heavy towing with vehicles equipped with the higher torque ratings. The 0090 only applies to trucks with 5 speed transmissions and early 6 speeds that are not equipped with the HO engine. If a 12 1/4" clutch is purchased from South Bend Clutch or Black Cloud Diesel, and gets destroyed at the dampened portion of the disc, warranty will not be granted.

Do not try and save money when it comes to choosing a clutch. This will only cost more in the long run.

NOTE: It's very important to Break-In your clutch with 500 miles of stop and go driving before you pull a load.
Your clutch will last longer if you avoid down-shifting whenever possible.  Down-shifting flexes the pressure plate, causing uneven wear.  Just remember, Use your breaks insteadthey're are alot less expensive to replace!


1989-1993 5 Speed Getrag Dodge 
1994-2004 5 Speed NV4500 Dodge
1999-2000.5 6 Speed NV5600 without High Output 235hp Dodge

Warranty: 1 year, 12,000 miles, whichever comes first, manufacturer defects only.

Part Type: