ICON 2007 - Current Jeep JK 1.75 - 4" Adjustable Stage 2 Coilover Conversion System
Available as an industry first is the ICON Jeep JK 1.75 ? 4? bolt-on and returnable to stock stage 2 coilover conversion system w/CDCV. This system not only offers superior ride quality and performance, but gives you the option to adjust ride height and compression valving based on how your vehicle is equipped. Included in this system is fabricated front coilover upper & lower mounts, rear upper subframe & lower axle mounts, reservoir mount, 2.0 V.S. Series remote reservoir coilovers w/CDCV, front and rear adjustable track bars, front and rear link arms, and necessary hardware for proper installation. This ICON system was designed from the ground up for improved suspension handling off road, increased wheel travel over stock, and the best ride quality on the market. The adjustable track bar with FK bearings not only improves rigidityover flexible factory joints, but offers adjustability to center the axles under the Jeep. ICON 2.0 V.S. Series shocks include FK bearings, billet topcap & rod ends, 7/8" shafts, all while increasing the duration of consistent damping over stock regardless of situation. Adjustable ride height, compression damping tuneablility with the turn of an external knob, and secondary spring rate engagement adjustability by the end user makes this kit highly tunable to your personal liking by all skill levels. The ICON JK hydraulic bumpstop kit (22019) is also an option that can be installed with the coilover conversion kit adding wheel control for high speed traversing.
? 100% Returnable to stock
? Adjustable ride height
? Adjustable secondary spring rate engagement
? Adjustable track bars with PTFE lined FK bearings
? Upgraded tubular steel link arms with adjustability front and rear
? Increased wheel travel over stock
? Vehicle specific tuned shocks w/CDCV to easily adjust compression damping
? Shock geometry improves stability
? Sheet metal front shock mount for maximum clearance & clean look
? 100% Made in the USA
? Lifetime guarantee that coil springs won?t sag
? Fits 2007 - Current Jeep JK Models 4wd applications
? High clearance steering ok with proper bumpstop installed (not included)
? Requires aftermarket exhaust that dumps before the rear axle.
? 2012+ models require exhaust extension kit (Part #22011) for proper front driveline clearance
? No driveline modifications necessary if kit is installed as intended (with or without track bars)
? Compatible with ICON front hydraulic bump stop system (Part #22019)
? Front End Alignment Recommended
Wheel & Tire Fitment Info:
OEM Wheels & Tires: Yes
Aftermarket Wheels: 4.5" Backspace
(wheel spacers required to run factory wheels with an oversized tire)
Aftermarket Tires: 33? Tall tires.
(35" tire packages require aftermarket high clearance fenders & minor modifications, test fitment recommended)
System Components Included:
? Front coilover upper & lower mounts
? Rear coilover upper & lower mounts, reservoir mount
? Qty (2) ICON 2.0 V.S. Series front coilover shocks with reservoir & CDCV
? Qty (2) ICON 2.0 V.S. Series rear coilover shocks with reservoir & CDCV
? Front & rear adjustable track bars
? Front and rear link arms
? Necessary Hardware
? Installation Instructions
22011 Jeep JK Exhaust Extension Kit
22012 Jeep JK Alignment Cam and Knock out Tool Kit
22013 Jeep JK Alignment Cam Kit (Fits in Front Lower or Rear Upper Link Position)
22014 Jeep JK Replacement Front Drive Shaft (2012+)
22016 Jeep JK Replacement Front Drive Shaft (07-11)
22017 Jeep JK Caster Punch Tool Only
- Item Requires Shipping
- 149.0 lbs.
- W12.0000” x H6.0000” x L6.0000”
- FREE Ground Shipping
Total Reviews (0)
Write the First Review!
You must login to post a review.