FREE SHIPPING OVER $50
Sale

EZ Lynk AutoAgent 2.0 Tuner by PPEI Kory Willis | 6.6L GM Duramax 2011-16

:
PPEI-66L-GM-11-16
$1,249.00 $788.33

PPEI Tuning EZ Lynk AutoAgent 2.0 Tuner - Emissions Compliant Tuning

NO RETURNS ON EZ LYNK TUNERS

EZ Lynk the most powerful tuning software to date for your GM Duramax 6.6L LML 2011-2016

ezlynk itunes download

The AutoAgent connects to the vehicle via the OBDII port and broadcasts a wifi access point (AP) which allows a wireless connection to the vehicle using any iOS or Android device. By launching the free EZ LYNK application on an iOS device, engine data is seamlessly streamed to the phone or other smart device. The AutoAgent also has the capability to re-flash vehicle system controllers with ECU profiles shared by technicians.

This particular model does NOT come with the monitor. In order to run the gauges and have on the fly tuning, you will need to have an iOS phone device (iPhone 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus (iOS 8 and above) and download the AutoAgent APP from iTunes or the Google Play Store for Android.

Previously known as a “Full Support Pack” is now called “Unlimited Support” which is a Permanent LYNK to PPEI. Meaning the end user will receive unlimited support and will receive all Profile/Calibration updates that pertain to their specific vehicle while “LYNKED” with PPEI.

GM: 2011 2016 6.6L LML Duramax

In order to run On the Fly Tuning a DSP-5 LML Switch is REQUIRED; Part # PPEI-LML-Switch

  • Data logging
  • Live vehicle diagnostics and troubleshooting
  • Mobile app that communicates seamlessly with your vehicle

Emissions Present DST This tune will program your factory/emissions compliant LML with Driver Selectable Tuning power levels consisting of +15HP, +30HP, +60HP, +100HP, and +150HP. The "DST Switch" must be installed in order for this tune to operate properly. All power levels are intended and designed for use with your factory engine components.This tune may NOT be used with aftermarket exhaust installed.

Emissions Present Single Tune This tune will program your factory/emissions compliant LML with the horsepower level listed in the tune name. This tune is to be used on a "stock" vehicle with emissions present.This tune may NOT be used with aftermarket exhaust installed. If you have an DST switch installed, it will not function with this tune installed.

Gauge Options:

Gauge's are able to monitored in multiple different views as seen in the pictures. All gauges can be set up for specific desired ranges, if in the range you are ok with the gauge will be green. When not, the gauge will be in a red warning state. If you pass through the warning state you will be able to set up defuel settings and the gauge will be white and make sure you do not hurt your truck.

  • RPM's (revolutions per minute)
  • Speed (MPH or KM/H)
  • Boost Pressure (PSI or Bar)
  • Engine Temperature (degrees Fahrenheit or Celsius)
  • Injector Pressure (kPSI or Bar)
  • Injector Pulse Width (ms)
  • Transmission Temperature(degrees Fahrenheit or Celsius)
  • Calculated Load (Percent %)
  • Injection Qty (mm3)
  • Torque Converter Slip (RPM)
  • Output Shaft Speed (RPM)
  • DPF Soot Load (Percent %)
  • Mass Air Flow (G/S)
  • EGR Valve Position (Percent %)
  • Turbo Vain Position (Percent %)
  • Barometric Pressure(PSI or Bar)
  • Transmission Line Pressure(PSI or Bar)
  • Air Intake Temperature(degrees Fahrenheit or Celsius)
  • Engine Oil Temperature(degrees Fahrenheit or Celsius)
  • Ambient Air Temperature(degrees Fahrenheit or Celsius)
  • Battery Voltage (Volts)
  • Engine Load (Percent %)
  • Exhaust Manifold Pressure(PSI or Bar)
  • Main Injection Timing (Degree Before Top Dead Center)
  • Throttle Position (Percent %)
  • Engine Coolant Temperature(degrees Fahrenheit or Celsius)

Data logging Features:

End users can conveniently share datalogs and other vehicle information to any technician with the touch of a finger without even leaving the driver seat. Data logs can be quickly started and stopped from the main gauge display screen and bookmarks can be added to draw interest to specific points of a datalog if desired. A graphical web based data log viewing solution will soon be incorporated into the EZ LYNK Cloud as well. Technicians can also create default PID configurations that are automatically loaded during a re-flash procedure to further assist in the troubleshooting and diagnostic process.

  • 30 Minutes of available Logging Time
  • Bookmarks for added notes when noting anything
  • Ability to e-mail data log file

Diagnostics:

  • Ability to Read Codes
  • Ability to Clear Codes